/// STRENGTH IN NUMBERS FREE ONLINE PREMIERE           

2011 Bergamont - Eurobike 2010

by Alasdair MacLennan
Aug 31, 2010 at 15:31

Continuing with the theme of German brands at Eurobike (after all, it is in Germany), here we have Bergamont. Not known hugely outside of Germany, the two bikes we chose to look at inside are the Big Air MGN for freeride duties and the Straightline Team for downhill. Check inside for all the info and a whole load of pictures!

Read on...

This is the first of the bikes we took a look at from Bergamont.  Although the Straightline is not a new bike to the Bergamont lineup, it has seen some pretty significant reworking over previous years to produce a sleek and neat frame that incorporates a load of new features.
This is the first of the bikes we took a look at from Bergamont. Although the Straightline is not a new bike to the Bergamont lineup, it has seen some pretty significant reworking over previous years to produce a sleek and neat frame that incorporates a load of new features.

New for 2011 is this Co-Ax pivot.  It aims, like others using a similar design, to keep the suspension active under braking by separating out the suspension and braking forces. This photo shows a bolt through axle, but production bikes will come with custom made Maxles to cope with the width of the dropouts. Notice the rear derailleur cable which is routed through the chainstay to keep it out of harms way.
New for 2011 is this Co-Ax pivot. It aims, like others using a similar design, to keep the suspension active under braking by separating out the suspension and braking forces. This photo shows a bolt through axle, but production bikes will come with custom made Maxles to cope with the width of the dropouts. Notice the rear derailleur cable which is routed through the chainstay to keep it out of harms way.

A Fox RC4 comes standard in 9.5
A Fox RC4 comes standard in 9.5" x 3.0" producing 220mm travel at an overall leverage ratio of 2.7:1. The rocker design has been changed over the 2010 model to create a less progressive curve to work with current shocks, but has approximately 20% increase in rate over linear by the end of the travel. The shock now also mounts to the swing link with bearings to reduce friction and improve small bump compliance.

This is the revised link, incorporating full cartridge bearings and aluminium hardware to reduce weight.  The linkage looks super slick with pocketing to scoop out the excess material and neat welds holding it all together.
This is the revised link, incorporating full cartridge bearings and aluminium hardware to reduce weight. The linkage looks super slick with pocketing to scoop out the excess material and neat welds holding it all together.

More neatness. A large axle holds the CNC machined yoke onto the front end, but this will be changed to a forged link to further reduce weight on the production model. Rather than a revolution on previous generations, this bike is clear evolution but in every way, from tweaked angles to far neater details which all help to improve performance and reduce weight without sacrificing on the strength.
More neatness. A large axle holds the CNC machined yoke onto the front end, but this will be changed to a forged link to further reduce weight on the production model. Rather than a revolution on previous generations, this bike is clear evolution but in every way, from tweaked angles to far neater details which all help to improve performance and reduce weight without sacrificing on the strength.

Coming out of the same Taiwanese factory as many of the big manufacturers shows in the finishing of these bikes as the welds and quality are right up there with the best.  The full bike seen here comes in at 16.9kg, the frame only weight sits at the 4.0kg mark without shock which is a fair improvement on the previous model. This reduction is helped in part by a new custom tubeset which allows for thinner walls to be used, greater surface area for welding at junctions and as a result, less weight with greater strength.
Coming out of the same Taiwanese factory as many of the big manufacturers shows in the finishing of these bikes as the welds and quality are right up there with the best. The full bike seen here comes in at 16.9kg, the frame only weight sits at the 4.0kg mark without shock which is a fair improvement on the previous model. This reduction is helped in part by a new custom tubeset which allows for thinner walls to be used, greater surface area for welding at junctions and as a result, less weight with greater strength.

More neat welds.  But the best bit about all of this is the price. How does 1599 Euro for the frame including Fox RC4 sound? Yeah, I thought so...
More neat welds. But the best bit about all of this is the price. How does 1599 Euro for the frame including Fox RC4 sound? Yeah, I thought so...

The next frame is the Big Air MGN which incorporates many of the neat features found on its bigger brother, the Straightline.  Reduced travel at 190mm comes from a 2.75 stroke shock to create the same overall leverage rate of 2.7 to 1 as the larger bike.  Although the bare frame weight is only 100g or so less than that of the downhill race machine, the Big Air is spec'd with a Rock Shox Vivid Air to save significant weight there. In fact, there'd be very little to stop you doing the same with the Straightline to save some weight there too if that's your bag.
The next frame is the Big Air MGN which incorporates many of the neat features found on its bigger brother, the Straightline. Reduced travel at 190mm comes from a 2.75 stroke shock to create the same overall leverage rate of 2.7 to 1 as the larger bike. Although the bare frame weight is only 100g or so less than that of the downhill race machine, the Big Air is spec'd with a Rock Shox Vivid Air to save significant weight there. In fact, there'd be very little to stop you doing the same with the Straightline to save some weight there too if that's your bag.

HammerSchmidt! So many bikes are on display with these, but what's interesting is the number of bikes that now have pivots in line with the drive ring on the Hammerschmidt to improve the isolation of pedalling forces.  With bikes now featuring ever lower bottom brackets the added ground clearance that this system offers while still keeping the spread of gears that a multi ring set up gives is a plus in my books.
HammerSchmidt! So many bikes are on display with these, but what's interesting is the number of bikes that now have pivots in line with the drive ring on the Hammerschmidt to improve the isolation of pedalling forces. With bikes now featuring ever lower bottom brackets the added ground clearance that this system offers while still keeping the spread of gears that a multi ring set up gives is a plus in my books.

Gold and black always looks good.  Here are the accented Co-Ax dropouts which will be fitted with a Maxle come production.  Post mounts keep it simple when you come to mounting your brake.
Gold and black always looks good. Here are the accented Co-Ax dropouts which will be fitted with a Maxle come production. Post mounts keep it simple when you come to mounting your brake.

The quality really belies the price of these bikes.  At 1499 Euro including Vivid Air there really is very little to compete and it makes you wonder why some manufacturers charge so much for their bikes and frames when others are pumping out high quality at prices like this.  Overall some slick bikes which look nice and come in at an awesome price.  And going on last year's downhill bike the performance should be there too.
The quality really belies the price of these bikes. At 1499 Euro including Vivid Air there really is very little to compete and it makes you wonder why some manufacturers charge so much for their bikes and frames when others are pumping out high quality at prices like this. Overall some slick bikes which look nice and come in at an awesome price. And going on last year's downhill bike the performance should be there too.

Visit the Bergamont website to see their entire lineup.

Stay tuned for more Eurobike coverage!
Must Read This Week

49 Comments

  • + 2
flag EasyKillah (Aug 31, 2010 at 17:21)
 I know straitline is the bike model, but it should have some straitline components on it if they're gonna call it that.....
  • + 3
flag pperini (Sep 2, 2010 at 10:19)
 what does one thing have to do with another??
[Reply]
  • + 1
flag cyprusdownhill (Aug 31, 2010 at 21:43)
 I own one (2009 model) These bikes are handling like hell!!! AWESOME bikes!!!

Did they produce a new gear-box model as well for 2011?
[Reply]
  • + 1
flag Luke-VTT (Sep 1, 2010 at 7:57)
 Please continue with Nicolai. The raddest of all german bike brands. (And they have a lot) Bergamont ist nothing special but solid.
[Reply]
  • + 1
flag Billy-C (Sep 1, 2010 at 15:32)
 Are there any UK dealers for this company, I've tried the website but no luck
[Reply]
  • + 3
flag devorider1 (Aug 31, 2010 at 16:17)
 :O so nice!
  • + 2
flag x0Lz (Aug 31, 2010 at 16:28)
 the DH team bike looks like Lapierre 920 DH paint ...
  • + 16
flag rigodon777 (Aug 31, 2010 at 16:31)
 Am I the only one who think it's a bit weird to be welding two CNC part together. why not simply making a one piece link?
  • + 6
flag postfach (Aug 31, 2010 at 16:55)
 Maybe it's hollow inside? Having any of the sides open it will collect dirt/mud so you couldn't have any material removed without that happening, and you can't machine something from the inside out.
  • + 1
flag Louloulefou (Aug 31, 2010 at 18:44)
 OOOW siock it is ! I want one ! ^^
  • + 0
flag rigodon777 (Aug 31, 2010 at 19:00)
 @postfach: My link on my TeamDH are open and they don't collect mud at all..
  • + 1
flag rigodon777 (Aug 31, 2010 at 19:01)
 Actually, those link are already open...
  • + 2
flag ridemoto157 (Aug 31, 2010 at 23:08)
 Both these bikes look absolutely legit!
  • + 1
flag PerryDH (Sep 1, 2010 at 13:06)
 maybe its cheaper to make two smaller parts and weld them together, maybe the factory there made in doesnt have a large enough cnc to do it in one go. We shall never know! but there has to be a reason
[Reply]
  • + 2
flag ahurst95 (Aug 31, 2010 at 23:39)
 that top one is a beauty!!
[Reply]
  • + 1
flag barros (Sep 2, 2010 at 11:15)
 It looks very similar with 2009 jamis Bam.But I'm liked!
[Reply]
  • + 1
flag DIRTFACTORY (Sep 1, 2010 at 2:22)
 yes, X0 brakes. Really nice bike.
[Reply]
  • + 1
flag goofyy (Aug 31, 2010 at 21:12)
 sick sick sick
!!! !!! !!!
[Reply]
  • + 1
flag Ollie-J (Sep 1, 2010 at 0:27)
 wow that staitline team ! *Mouth water*
[Reply]
  • + 1
flag rockyfreerider (Aug 31, 2010 at 18:54)
 Simple and efficient design, really nice!
[Reply]
  • + 2
flag dirtbagbiker (Aug 31, 2010 at 17:39)
 cool looking bikes.
[Reply]
  • + 1
flag Alex-Mtl (Aug 31, 2010 at 16:21)
 Same design, smaller chassis for both bikes. Not bad bikes, very clean.
[Reply]
  • + 1
flag crash21 (Aug 31, 2010 at 20:38)
 them and scott clean and simple
[Reply]
  • + 1
flag anonimatomloki (Aug 31, 2010 at 17:51)
 The Dh bike its glorius but the back park of the frame scares me hahaha
[Reply]
  • + 1
flag anotherbikerguy (Aug 31, 2010 at 17:51)
 seems like everybody's got a concentric axle pivot these days...
  • + 2
flag Alex-Mtl (Aug 31, 2010 at 18:10)
 Dave's influence.
  • + 1
flag ForestFab (Sep 1, 2010 at 2:38)
 what about Dave's Split Pivot patent??? :O
  • + 1
flag Alex-Mtl (Sep 1, 2010 at 7:13)
 I said influence, not copy paste like some very big company starting by T and ending with Rek did.
  • + 1
flag ForestFab (Sep 1, 2010 at 7:21)
 T_-_-_REK... Rolleyes ???
lol
[Reply]
  • + 1
flag winko (Sep 1, 2010 at 9:06)
 Big air is my next year's bike, for sure Smile
[Reply]
  • + 1
flag andyDH (Sep 1, 2010 at 9:31)
 Wow... sweet.
[Reply]
  • + 1
flag tackytraks (Aug 31, 2010 at 23:20)
 ewwwww post mounts.
[Reply]
  • + 1
flag Maffa-U (Aug 31, 2010 at 17:34)
 very very nice.
[Reply]
  • + 1
flag tetsuwa (Sep 1, 2010 at 6:02)
 ABP patent?
  • + 1
flag ForestFab (Sep 1, 2010 at 7:08)
 TREK hasn't patented ABP, but Weagle has patented Split Pivot... Wink
[Reply]
  • + 1
flag whosyodaddy (Aug 31, 2010 at 17:49)
 sexy...
[Reply]
  • + 1
flag Tatuator (Sep 1, 2010 at 1:35)
 X-0 brakes?
[Reply]
  • - 2
flag bankturn (Aug 31, 2010 at 16:47)
 Definitely nothing special...but for a good price they look solid.
  • + 1
flag bigburd (Sep 1, 2010 at 9:52)
 I think it does looks special in this age of 400 linked/pivoted bikes , simple stylish and cheap!
  • + 2
flag bankturn (Sep 1, 2010 at 10:09)
 Fair enough. They are indeed attractive.
[Reply]
Below threshold threads are hidden

Post a Comment



You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2012. Pinkbike.com. All rights reserved.
dv42 0.057322